Radolite is used to sterilise mould and algae infected surfaces before redecorating or removal of wallpaper. May also be used as a maintenance wash to control mould or algae where painting is not possible or desired.

​

There are basic measures to assist in the control of condensation and black mould. The Radolite System complements these basic controls and will prevent these problems occurring for many years.

These methods are particularly helpful in the domestic environment but can be applied equally to commercial, catering, leisure or medical establishments.

It is always important to reduce the risk of condensation by observing the following simple recommendations.

• Ensure rooms are always warm and properly ventilated, maintaining some low heating throughout the day if possible.

• When cooking, washing, bathing or drying clothes, keep the door closed and the window open - this prevents warm moist air moving to colder areas of the building.

• In cold weather keep some heating on all the time.

• If a paraffin or flueless gas heater is used ensure a window is open a little (every litre of paraffin produces about 1 litre of water).

• Improve internal/external wall insulation.

• Use ventilation systems where appropriate, such as the Airtech PIV Systems and/or Extract fans.

 

Radolite will not prevent the re-growth of mould in the long term. Its use is to remove active attacks prior to decoration using a fungicidal coating such as Fungi-Chek. For long-term eradication of mould etc a balance between heating ventilation and insulation must be achieved. A PIV unit can be to assist in this process. This device acts to produce a positive air pressure within the domestic environment and will keep the relative humidity below a level that will support condensation.

​